Rockwell Automation 1734-XXXX POINT I/O Digital and Analog Modules and POINTBlock I/O Modules User Manual
Page 202
Advertising
Rockwell Automation Publication 1734-UM001E-EN-P - July 2013
210 Configure POINT I/O Modules for DeviceNet Networks
the network, and you are prevented from selecting a specific
communication rate.
3. From the Device Parameters dialog, select the filter of your choice by
selecting and typing in the filter time, noting that each input channel can
have its own time selection.
4. From the Device Parameters dialog, click Download to Device.
Advertising