Modbus support – Rockwell Automation 1756-L6x_L7x ControlLogix System User Manual User Manual
Page 118
Advertising
118
Rockwell Automation Publication 1756-UM001O-EN-P - October 2014
Chapter 6
Serial Communication on 1756-L6x Controllers
Modbus Support
To use ControlLogix controllers with the Modbus protocol, establish a serial port
connection and execute a ladder-logic routine.
Two controller projects specific to the Modbus network are available as sample
programs within the Logix Designer application:
•
ModbusMaster.ACD
•
ModbusSlave.ACD
For information about using these sample programs, see the Using Logix5000
Controllers as Masters or Slaves on Modbus Application Solution, publication
Advertising