Rockwell Automation 1756-L6x_L7x ControlLogix System User Manual - Manual (Page 81)

Rockwell Automation Publication 1756-UM001O-EN-P - October 2014 81
ControlLogix System and Controllers Chapter 4
Figure 9 - Multiple Devices Connected Via Multiple Networks
Design a ControlLogix System When you design a ControlLogix system, there are several system components to
consider for your application. Some of these components include the following:
• I/O devices
• Motion control and drive requirements
• Communication modules
• Controllers
• Chassis
• Power supplies
• Studio 5000 environment
For more information to design and select components for your ControlLogix
system, see the ControlLogix Selection Guide, publication
1756-SG001 .
See the Additional Resources section in the preface for more information if you
are designing your ControlLogix System for any of the following applications:
• Motion with Integrated Motion on the EtherNet/IP network
• Motion with the use of a coordinate system
• Motion with sercos or analog motion
HART
L75 EN2T DNB CN2 EN2T IF
8H
PowerFlex Drive
DeviceNet
FLEX™ I/O
Co
nt
ro
lN
et
Ethernet Device-level
Ring Network
Et
he
rn
et
HART Endress + Hauser Flowmeters
FactoryTalk Server
POINT I/O™