Rockwell Automation 1756-L6x_L7x ControlLogix System User Manual - Manual (Page 40)

40 Rockwell Automation Publication 1756-UM001O-EN-P - October 2014
Chapter 2 Install the 1756-L6x Controller
For information to install a 1756-BATM battery module or replace a 1756-
BATM assembly, see the ControlLogix Battery Module Installation Instructions,
publication
1756-IN576 .
1. Connect the battery connector to the port to the right of the battery slot.
2. Snap the battery into the battery slot.
3. Write the date on the battery label.
4. Attach the label to the inside of the controller door.
Install the Battery on a Series B Controller
Complete these steps to install the battery on a series B controller.
ATTENTION: For a series A controller, connect only a 1756-BA1 battery or a
1756-BATM battery module. The use of other batteries can damage the
controller.
Wire Terminal Location Connected Wire
Top No connection
Middle Black lead (-)
Bottom Red lead (+)
ATTENTION: For a series B controller, connect only a 1756-BA2 battery. The
use of other batteries can damage the controller.
DATE