Rockwell Automation 1756-L6x_L7x ControlLogix System User Manual - Manual (Page 193)

Rockwell Automation Publication 1756-UM001O-EN-P - October 2014 193
Troubleshoot the Module Appendix A
#0319 No Secondary Resources Available
#031E No Available Resources
#031F No Available Resources
#0800 Network Link Offline
#0801 Incompatible Multicast RPI
#0814 Data Type Mismatch
#FD01 Bad Backplane EEPROM
#FD02 No Error Code
#FD03 Missing Required Connection
#FD04 No CST Master
#FD05 Axis or GRP Not Assigned
#FD06 Sercos Transition Fault
#FD07 Sercos Init Ring Fault
#FD08 Sercos Comm Fault
#FD09 Sercos Init Node Fault
#FD0A Axis Attribute Reject
#FD1F Safety I/O
#FD20 No Safety Task
#FE01 Invalid Connection Type
#FE02 Invalid Update Rate
#FE03 Invalid Input Connection
#FE04 Invalid Input Data Pointer
#FE05 Invalid Input Data Size
#FE06 Invalid Input Force Pointer
#FE07 Invalid Output Connection
#FE08 Invalid Output Data Pointer
#FE09 Invalid Output Data Size
#FE0A Invalid Output Force Pointer
#FE0B Invalid Symbol String
#FE0C Invalid Scheduled Personal Computer Instance
#FE0D Invalid Symbol Instance
#FE0E Module Firmware Updating
#FE0F Invalid Firmware File Revision
#FE10 Firmware File Not Found
#FE11 Firmware File Invalid
#FE12 Automatic Firmware Update Failed
#FE13 Update Failed - Active Connection
#FE14 Searching Firmware File
#FE22 Invalid Connection Type
Table 51 - I/O Fault Messages (Continued)
Code Message