Use the controller status menu to upload – Rockwell Automation 1756-L6x_L7x ControlLogix System User Manual User Manual
Page 61
Advertising
Rockwell Automation Publication 1756-UM001O-EN-P - October 2014
61
Start Using the Controller
Chapter 3
1.
After setting the communication path, click Upload in the Who Active
dialog box.
2.
Click Upload after verifying the project that you are uploading in the
Connected to Upload dialog box.
Use the Controller Status Menu to Upload
After you have set a communication path in the project, you can use the
Controller Status menu to upload from the controller. To upload, from the
Controller Status menu, choose Upload.
Advertising