Rockwell Automation 1756-L6x_L7x ControlLogix System User Manual - Manual (Page 132)

132 Rockwell Automation Publication 1756-UM001O-EN-P - October 2014
Chapter 8 I/O Modules
• Analog I/O
• Configurable flowmeter
• Digital I/O
• HART analog I/O
• High-speed analog I/O
• High-speed counter
• Low-speed counter
• Programmable limit switch
9. Add any other I/O modules that you are using in the remote chassis.
10. Complete steps 1 … 9 until your remote I/O network and I/O modules are
configured.
Distributed I/O Distributed I/O refers to I/O that is remote from the controller and is not
designed for use with a specific controller. Examples of distributed I/O that can
be used with Logix5000 controllers include the following:
• 1794 FLEX I/O modules
• 1734 POINT I/O modules
• 1797 FLEX Ex™ I/O modules
• 1738 ArmorPOINT® I/O modules
• 1732 ArmorBlock® I/O modules
• 1753 GuardPLC™ Safety I/O modules
• 1790 CompactBlock™ LDX I/O modules
• 1791 CompactBlock Guard Safety I/O modules
• 1791 CompactBlock I/O modules
• 1732DS ArmorBlock Guard Safety I/O modules
• 1792 ArmorBlock MaXum™ I/O modules
Distributed I/O is connected to the ControlLogix controller via a
communication network. The ControlLogix controller supports the use of
distributed I/O via these networks:
• EtherNet/IP
• ControlNet