Rockwell Automation 1756-L6x_L7x ControlLogix System User Manual User Manual
Page 131
Advertising
Rockwell Automation Publication 1756-UM001O-EN-P - October 2014
131
I/O Modules
Chapter 8
5.
Specify the chassis and connection properties according to your network
configuration.
6.
Right-click the backplane of the newly added communication module and
choose New Module.
7.
Select the I/O module that you want to add and click OK.
8.
Specify the Module Properties according to your module and application.
See the
section in the preface for more information
about the module configuration properties for any of the following
modules:
Advertising