Rockwell Automation 1756-L6x_L7x ControlLogix System User Manual - Manual (Page 60)

60 Rockwell Automation Publication 1756-UM001O-EN-P - October 2014
Chapter 3 Start Using the Controller
Use the Controller Status Menu to Download
After you set a communication path in the Logix Designer application, you can
use the Controller Status menu to download to the controller. To download,
from the Controller Status menu, choose Download.
Figure 4 - Download Via the Controller Status Menu
Upload from the Controller When you upload a project to the controller, it copies the project from the
controller to the Logix Designer application. To upload a project, use one of these
methods:
• Use the Who Active Dialog Box to Upload , page 60
• Use the Controller Status Menu to Upload , page 61
Use the Who Active Dialog Box to Upload
You can use the features of the Who Active dialog box to upload from your
controller after you have set the communication path. Complete these steps to
upload from the controller.
TIP After the download completes on a 1756-L7x controller, the project name is
indicated on the scrolling status display.