Rockwell Automation 1756-L6x_L7x ControlLogix System User Manual - Manual (Page 134)

134 Rockwell Automation Publication 1756-UM001O-EN-P - October 2014
Chapter 8 I/O Modules
2. Specify the communication module properties according to your network
configuration.
For more information about the communication module and network
properties, see the
Additional Resources section in the preface.
3. Right-click the communication network and choose New Module.
4. Add the communication adapter for the distributed I/O platform that you
are using.
5. Specify the module and connection properties according to your network
configuration.
6. Right-click the bus of the newly added communication adapter and choose
New Module.
7. Select the I/O module that you want to add and click OK.