Rockwell Automation 1756-L6x_L7x ControlLogix System User Manual User Manual
Page 51
Advertising
Rockwell Automation Publication 1756-UM001O-EN-P - October 2014
51
Start Using the Controller
Chapter 3
2.
From the Available Driver Types pull-down menu, choose the
RS-232 DF1 device driver.
3.
Click Add New.
The Add New RSLinx Driver dialog box appears.
4.
Type the driver name and click OK.
5.
Specify the serial port settings.
a. From the Comm Port pull-down menu, choose the serial port on the
workstation to which the cable is connected.
b. From the Device pull-down menu, choose Logix 5550/CompactLogix.
c. Click Auto-Configure.
6.
If the auto configuration is successful, click OK.
Advertising