Rockwell Automation 1756-L6x_L7x ControlLogix System User Manual - Manual (Page 67)

Rockwell Automation Publication 1756-UM001O-EN-P - October 2014 67
Start Using the Controller Chapter 3
The following table describes the Automatic Firmware Update options
that you can choose for the project. The Automatic Firmware Update
property is also referred to as the Firmware Supervisor feature.
4. Click Store and click OK in the confirmation dialog box that appears.
If you want to Then choose
Enable automatic firmware updates so I/O devices in the
configuration tree of the controller that are configured to use
Exact Match Keying are updated as required Enable and Store Files to Image (1)
(1) The devices that are used with this option must support the revision of firmware being updated to.
Disable automatic firmware updates and remove any I/O
firmware files that are stored with the image Disable and Delete Files from Image
Disable automatic firmware updates when there are no
firmware files are stored with the image Disable
Store is dimmed (unavailable). Indicates the SD card is locked.