Dell C5765DN MFP Color Laser Printer - Manual (Page 114)

3 Copy
114
On
Build Job is applied. The feature buttons appear. Specify any option if necessary.
Note • The features selected here cannot be canceled or changed while the machine executes a copy job.
For information on features available in Build Job, refer to "Features that can be set in Build Job"
(P.114).
Features that can be set in Build Job
Copy Output
For more information, refer to "Copy Output (Specifying Finishing Options)" (P.109).
Booklet Creation
For more information, refer to "Booklet Creation (Creating a Booklet)" (P.99).
Covers
Note • The machine does not copy on a cover when using the Build Job feature.
For more information, refer to "Covers (Attaching Covers to Copies)" (P.102).
Segment Separators
For more information, refer to "[Segment Separators] Screen" (P.116).
[Copy] Screen When Build Job is in Progress
The following describes the screen that appears while the Build Job is being executed.
Chapter Start
Displays the [Build Job - Chapter Start] screen.
Refer to "[Build Job - Chapter Start] Screen" (P.116).
Insert Separators
Displays the [Segment Separators] screen.
Refer to "[Segment Separators] Screen" (P.116).
Change Quantity
Displays the [Change Quantity] screen on which you can change the number of copy sets
using the numeric keypad.
Change Settings
Displays the [Copy] screen on which you can change the settings for the next document.
After changing the settings, press the <Start> button on the control panel to start scanning
of the document. To return to the previous screen, press the < # > button.
When using a stored program for Build Job
While the machine makes copies using the Build Job feature, you can use a stored program.
1) Select [Change Settings].
2) Select the [Job Assembly] tab.