Dell C5765DN MFP Color Laser Printer - Manual (Page 541)

Network-related Problems
541
When using NetWare
The possible causes, check points, and remedies for problems when using NetWare are as
follows:
When you cannot print
Cause Check point Remedy
Network equipment, such as
hubs, does not support
automatic frame type
detection.
Confirm whether the data link
indicator of the network
equipment port to which the
machine is connected is lit.
Confirm whether the frame
types used by the file servers on
the network are standardized.
Specify the frame type set on
the connected file server as the
frame type for the machine.
A problem occurred on the
network between the computer
and the machine.
Use NWADMIN on the
computer to confirm whether
the machine object can be
browsed.*
Replace the faulty network
cable connected between the
computer and the machine.
Job sender (user or group
name) is not specified in [User]
for the print queue.
Use NWADMIN from a
computer to confirm whether
the print queue object's [User]
information lists the job sender
(user or group name).*
Re-send the print data to the
print queue for which the job
sender (user or group name) is
registered as the [User].
Use NWADMIN from a
computer to register job sender
(user or group name) to [User]
of [Print Queue].*
Job transmission to the print
queue is prohibited.
Use PCONSOLE to confirm
whether [User can register to
the queue] is set to [Yes] under
[Current Queue Status] of
[Print Queue].
Use PCONSOLE to set the
item to [Yes].
Use NWADMIN on the
computer to confirm whether
the operator flag is being
confirmed with [Recognition]
of the print queue.*
Use NWADMIN on a
computer to confirm whether
each item of the operator flag is
being confirmed with
[Recognition] of the print
queue.*
Job sender (user or group
name) is not specified in the
user setting for the print server.
Use NWADMIN from a
computer to confirm that the
print server's [User]
information lists the job sender
(user or group name).*
Re-send the print data to the
print queue whose [User] of
[Print Server Information]
includes the job sender (user or
group name).
Use NWADMIN from a
computer to register job sender
(user or group name) to [User]
information of the print
server.*
The print queue where the user
has transmitted the print data,
is not assigned to the machine.
Use NWADMIN from a
computer to check the print
queue's [Assignment] whether
the machine is assigned in the
printer list serviced by the print
queue.*
Re-send the print data to the
print queue which is assigned
to the machine.*
Use NWADMIN from a
computer to add the print
queue to the machine.*