Dell C5765DN MFP Color Laser Printer - Manual (Page 603)

Status Code
603
033-545 [Cause] The other machine may not be a facsimile.
[Remedy] Check whether the other machine is a facsimile.
033-546 [Cause] A dial tone was not detected.
[Remedy] Check whether the line is connected correctly.
033-547 [Cause] Communication was terminated by a cause such as pressing the <Stop> button.
[Remedy] No measure is required.
033-548 [Cause] Cannot transmit manually because a line is unavailable.
[Remedy] Establish communication such as by telephone, and execute the operation again.
033-549 [Cause] Cannot use the Fax service because of causes such as memory is insufficient.
[Remedy] Wait for a while, and execute the operation again.
033-550 [Cause] Cannot execute another job because fax communication is in progress.
[Remedy] Wait until the job being communicated completes, and then execute the operation
again.
033-551 [Cause] You attempted to change a job immediately before fax or telephone communication
completed.
[Remedy] Wait for a while, and execute the operation again.
033-552 [Cause] The total quantity of error lines detected with G3 exceeded the set value.
[Remedy] Confirm the model of the other machine, and execute the operation again. If receiving,
ask the sender to send again.
033-553 [Cause] This machine does not have confidential or relay function. The F-code sent from the
other machine contains an instruction for a function not supported by the machine.
[Remedy] If necessary, check whether the sender entered an invalid F-code.
033-554 [Cause] The password was omitted or did not match in fax communication.
[Remedy] No measure is required.
033-555 [Cause] The password received from the other machine did not match the password for receiving
faxes on the machine.
[Remedy] Check whether the sender specified an incorrect machine password.
033-556 [Cause] The password sent to the other machine did not match the password for receiving faxes
on the other machine.
[Remedy] If necessary, check whether the correct machine password has been instructed to the
other machine.
033-557 [Cause] The number of services or of recipients exceeds the maximum limit.
[Remedy] Wait until the number of jobs awaiting transmission decreases, or reduce the number of
recipients, and then send again.
033-558 [Cause] The machine is set to reject faxes without a remote ID, and a remote ID was not sent
from the other machine.
[Remedy] Ask the sender to set a remote ID. If necessary, set the machine to receive even when a
remote ID is not sent.
033-563 [Cause] Paper that can print faxed documents is not loaded in a tray.
[Remedy] Take one of the following measures:
• Specify the paper size.
• Confirm whether the paper tray is set correctly.
Status Code Cause and Remedy