Machine trouble, Machine trouble" (p.513) – Dell C5765DN MFP Color Laser Printer User Manual

Page 513

Advertising
background image

Machine Trouble

513

Machine Trouble

Before you conclude that the machine is defective, check the machine status again.

Symptom

Cause

Remedy

The machine is

not powered on.

Is the main power and power

switched on?

Switch the main power and power on.
Refer to "Product Overview" (P.29).

Is the power cord plugged into

the power outlet?

Switch the main power and power off, and

then firmly plug the power cord into the

connector of the machine and power outlet.

Then switch the main power and power on.
Refer to "Product Overview" (P.29).

Is the power cord

disconnected from the

machine?
Does the AC outlet supply

power properly?

Connect another appliance to the outlet to

verify the power supply.
Refer to "Before Using the Machine" (P.15).

The <Error>

indicator is

blinking.

The system of the machine or

the components installed may

have a trouble.

Switch the main power and power off and

then on. If the error still is not resolved,

contact Customer Support at

dell.com/contactdell.

The <Error>

indicator is lit.

Is paper or a document

jammed?

Remove the jammed paper or document.
If paper is jammed, refer to "Paper Jams"

(P.619), and a document is jammed, refer to

"Document Jams" (P.626).

Is the front cover or top cover

open?

Solve the problem by following the message

displayed.

Is a message displayed on the

touch screen prompting you

to replace the consumables?

Replace the consumables indicated in the

message.
Refer to "Replacing Consumables" (P.218).

Is a message displayed in the

upper part of the touch

screen?

Check the message and solve the problem.

If a status code such as "016-450" is displayed,

check the status code list and solve the

problem.
Refer to "Status Code" (P.555).

The touch screen

is too dark.

Is the <Power Saver> button

lit?

The machine is in the Power Saver mode.

Press the <Power Saver> button on the

control panel to exit the Power Saver mode.
Refer to "Product Overview" (P.29).

Is the screen brightness too

low?

Adjust the screen brightness on the [Screen

Brightness] screen.

Advertising