Dell C5765DN MFP Color Laser Printer - Manual (Page 327)

Connectivity & Network Setup
327
Note • Select a communication mode to send data scanned via FTP from [Passive Mode] and [Active Mode].
[Passive Mode] is selected by default. You can change the setting from Dell Printer Configuration Web
Tool.
Receive E-mail
Port Status
Select [Enabled] when you receive e-mails.
Send E-mail
Port Status
Select [Enabled] when you send e-mails.
E-mail Notification Service
Port Status
Select [Enabled] when you use the E-mail Notification Service. The E-mail Notification
Service notifies you of the machine status or the completion of a print job, and a direct fax
job by e-mail.
Note • [Consumables Status], [Parts Status], [Paper Tray Status], [Output Tray Status], [Jam Status],
[Interlock Status], and [Fault Notice] are notified as the machine status.
• You can configure the E-mail Notification Service in Dell Printer Configuration Web Tool.
WSD
Note • WSD stands for Web Services on Devices.
WSD Print - Port Status
Select [Enabled] to use WSD Print.
Set this when you search a device on a network from Windows Vista
®
, Windows
®
7, and
Windows
®
8.
Port Number
Enter a port number from 1 to 65535.
The default value is 80.
Note • If the default port number is used, it may conflict with other ports. Make sure to set up the port number
that is not in use.
Internet Services (HTTP)
Port Status
Select [Enabled] to use Dell Printer Configuration Web Tool.
For more information about Dell Printer Configuration Web Tool, refer to "Dell Printer
Configuration Web Tool Settings" (P.417).
Port Number
Enter a port number for the Internet Services from 1 to 65535.
The default value is 80.
Note • If the default port number is used, it may conflict with other ports. Make sure to set up the port number
that is not in use.
• You cannot select [Port Number], if HTTP port is disabled.
To configure [Port Number], enable port status and reboot the machine, and then configure [Port
Number].