Dell C5765DN MFP Color Laser Printer - Manual (Page 214)

12 Paper and Other Media
214
Changing the Paper Settings
This section describes how to change the paper type for Trays and how to set image quality
processing by the individual paper type.
After loading paper in a tray, specify the type of paper loaded and select image quality for the
paper type. Setting image quality for each paper type enables you to print with the most
suitable image quality for the paper type.
For information on image quality processing for each paper type, refer to "Image Quality" (P.303).
Note • Users can name Custom 1 to Custom 5 displayed in the paper type settings. For information on how to
set names to Custom 1 to Custom 5, refer to "Custom Paper Name/Color" (P.301).
• You can change the paper type setting without entering to the System Administration mode on the
[Setup] screen, which is displayed by selecting [Setup] in the [Home] screen if you configure the
settings in advance. For more information, refer to "Customize Paper Supply Screen" (P.302).
1
Press the <Log In/Out> button.
2
Enter the system administrator's user ID with
the numeric keypad or the keyboard displayed
on the screen, and select [Enter].
When a passcode is required, select [Next] and
enter the system administrator's passcode, and
select [Enter].
Note • The default user ID is "admin".
• The default passcode is "1111".
3
Select [Tools] on the [Home] screen.
Note • When the [Home] screen is not displayed on
the touch screen, press the <Home> button.
4
Select [System Settings] > [Common Service
Settings] > [Paper Tray Settings].
<Log In/Out> button