Step 3 configuration on the computer, Dell printer configuration web tool setting items, R to "dell printer – Dell C5765DN MFP Color Laser Printer User Manual

Page 438: Configuration web tool setting items" (p.438)

Advertising
background image

17 Printer Environment Settings

438

3

Set an IP address and the other addresses.
Skip this step if an IP address is already set.

If DHCP or BOOTP is available in your environment, configure the method for obtaining

the address. The configuration of an IP address, a subnet mask, and a gateway address is not

required.

For information on how to set an IP address, refer to "Protocol Settings" (P.328).

4

Select [Close] repeatedly until the [Tools] screen is displayed.

5

Select [Close].

Note

Rebooting the machine may be required depending on the settings. When a message displayed on the

screen, follow the message and reboot the machine.

6

Print a configuration report to confirm that the SMB port is enabled and that TCP/IP is set
up correctly.

For information on how to print a configuration report, refer to "Print Reports" (P.260).

Note

If NetBEUI protocol is used as the transport protocol, select [NetBEUI] on the [Port Settings] screen

for SMB in Dell Printer Configuration Web Tool.

7

Configure the other SMB settings as necessary.

For information on the SMB settings, refer to "Dell Printer Configuration Web Tool Setting Items"

(P.438).

Step 3 Configuration on the Computer

To print from the machine, you need to install a print driver on your computer.

For information on the supported operating systems, refer to "Supported Operating Systems" (P.428).
For information on the driver installation procedures, refer to the manual contained in the Driver CD

Kit.

Dell Printer Configuration Web Tool Setting Items

You can configure the following setting items using Dell Printer Configuration Web Tool:

For information on how to start Dell Printer Configuration Web Tool, refer to "Starting Dell Printer

Configuration Web Tool" (P.420).

• Spool Destination for Jobs

([Properties] > [General Setup] > [Memory Settings] > [SMB])

• Port Settings
• Transport Protocol
• Maximum Connections
• Workgroup
• Server Name
• TBCP Filter
• Unicode

®

Support

• Auto Master Mode
• Password Encryption
• Obtain WINS Server Address Automatically
• Primary Server IP Address & Port
• Secondary Server IP Address & Port

Advertising