Dell C5765DN MFP Color Laser Printer - Manual (Page 66)

3 Copy
66
Preset %
Select a copy ratio from the following options.
• 100%
Copies at the same image size as the original document.
• Auto %
Automatically determines the copy ratio based on the document size and the paper size
specified in [Paper Supply], and copies the document to fit into the paper.
Note • This cannot be selected together with [Auto Select] under [Paper Supply].
• Preset ratios
Select from the preset ratios.
You can change the copy ratio associated with each button. For information on the settings, refer to
"Reduce/Enlarge Presets" (P.323).
SlightReduction (Improves Fit)
Select this check box to slightly reduce the specified copy ratio to copy the complete image
onto the paper.
Note • If you select [SlightReduction (Improves Fit)] and you do not want to erase the edges of the document,
set the amount of edge erase to 0 mm. Note that if the amount is set to 0 mm, the edges of the copied
document may get dirty. You can set [Edge Erase] on the [Layout Adjustment] screen. For more
information, refer to "Edge Erase (Erasing Edges and Margin Shadows of the Document)" (P.90).
When [Independent X - Y%] is Selected
You can specify reduction/enlargement ratios for the width and length individually.
1
Select any option.
Variable %
• Width - X%, Length - Y%
Allows you to specify reduction/enlargement ratios for the width and length in the range
from 25 to 400% in 1% increments. Use [+] and [-] or the numeric keypad to specify a
ratio.
Lock X - Y%
Allows you to make the same ratio adjustment for the width and length at the same time.
Preset %
• Width: 100% Length: 100%
Copies at the same image size as the original document.
• Auto X - Y%
Automatically determines the reduction/enlargement ratios for the width and length so
that the document image fits in the paper.