Edge erase - right edge" (p.320), Center erase/binding edge erase" (p.320), Edge erase - 2 sided original - side 2" (p.320) – Dell C5765DN MFP Color Laser Printer User Manual
Page 320: Image shift - side 1" (p.320), Image shift - side 2" (p.320), Image rotation" (p.320), Image rotation - rotation direction" (p.320), Original orientation" (p.320), Copy output" (p.320), Uncollated - default separator tray" (p.320)
15 Tools
320
Edge Erase - Right Edge
Set the default value for the amount of edge erased from the original in the right directions
in [Edge Erase] in the [Layout Adjustment] screen. Set the value from 0 to 50 mm in 1 mm
increments.
Note
• You cannot copy the whole area even if you set [0] to [Edge Erase - Right Edge].
Center Erase/Binding Edge Erase
Set the default value for [Center] in [Edge Erase] in the [Layout Adjustment] screen. Set
the value from 0 to 50 mm in 1 mm increments.
Note
• You cannot copy the whole area even if you set [0] to [Center Erase/Binding Edge Erase].
Edge Erase - 2 Sided Original - Side 2
Set the default value for [2 Sided Original - Side 2] of [Edge Erase] in the [Layout
Adjustment] screen.
Image Shift - Side 1
Set the default value for [Side 1] of [Image Shift] in the [Layout Adjustment] screen.
Image Shift - Side 2
Set the default value for [Side 2] of [Image Shift] in the [Layout Adjustment] screen.
Image Rotation
Set the default value for [Image Rotation] in the [Layout Adjustment] screen.
Image Rotation - Rotation Direction
Set the default value for [Image Rotation - Rotation Direction] of [Image Rotation] in the
[Layout Adjustment] screen.
Original Orientation
Set the default value for [Original Orientation] in the [Layout Adjustment] screen.
Pages per Side
Set the default value for [Pages per Side] in the [Copy] and [Output Format] screens.
Copy Output
Set the default value for [Copy Output] in the [Copy] and [Output Format] screens.
Uncollated - Default Separator Tray
Set the default value for [Separator Tray] under [Copy Output] > [Uncollated with
Separators] in the [Copy] and [Output Format] screens.
Note
• An optional component is required to use this feature. For more information, contact Customer
Support at dell.com/contactdell.
Sample Job
Set the default value for [Sample Job] in the [Job Assembly] screen.
Booklet Creation - Default Cover Tray
Set the default value for [Covers] which is displayed when you select a Cover page option in
the [Booklet Creation] screen.