Dell C5765DN MFP Color Laser Printer - Manual (Page 337)

Connectivity & Network Setup
337
Text String Added to User Name
Enter text strings for [Text String Added to User Name] when you use additional text
strings. Up to 64 characters are allowed.
When [Use Added Text String] is set to [Enabled], enter the corresponding fixed text string.
For Example:
When "mail" is set for [Attribute of Typed User Name] and the information registered for
the target user is "[email protected]," you will need to enter
"[email protected]".
However, if [Use Added Text String] is set to [Enabled] and "@myhost.example.com" is
specified for [Text String Added to User Name], you will only need to enter "mail" from the
control panel because the machine adds "@myhost.example.com" to the end of the string.
Attribute of Smart Card
When a smart card is used for LDAP authentication, set the attribute of the card ID to
perform a search on the LDAP server to authenticate the user who has the card. Up to 32
characters are allowed.
Note • This item is displayed when [Smart Card Link Mode] under [Tools] > [Authentication/Security Settings]
> [Authentication] > [User Details Setup] is set to [No Passcode Required].
Network User ID Attribute
When a smart card is used for LDAP authentication, set the attribute of the user name to
be used for a smart card ID search. The user name is given to the remote service as the
authentication information. Up to 32 characters are allowed.
Note • This item is displayed when [Smart Card Link Mode] under [Tools] > [Authentication/Security Settings]
> [Authentication] > [User Details Setup] is set to [No Passcode Required].
Login Credentials to Search Entries
Select which users are allowed to search the Address Book.
You can select from [Remotely Authenticated User] or [System].
Login Name
Set a user name for the Address Book search and access to the directory server using
[Authentication of User Attributes] method for LDAP authentication. Set this item only
when authentication is required for the search for the directory service. Up to 255 characters
are allowed.
Password
Set a login password for the user specified in [Login Name]. Up to 32 characters are allowed.
Search Directory Root
Enter a search root character string with up to 255 characters.
Note • Enter the distinguished name of the root node. (Example: CN=users, DC=mydomain, DC=dell, DC=com)
Scope of Search from Root Entry
Select the search range from the root entry.
• Root entry only
- Searches the root level only.
• One level below root entry only
- Searches from the root level to one level below the root level.
• All levels below root entry
- Searches from the root level to all lower levels below the root level.