Dell C5765DN MFP Color Laser Printer - Manual (Page 345)

Print Service Settings
345
Print Service Settings
In [Print Service Settings], you can configure settings related to the Print feature.
Using Dell Printer Configuration Web Tool, you can make more detailed settings.
For more information, refer to "Dell Printer Configuration Web Tool Settings" (P.417).
The following shows the reference section for each setting.
Allocate Memory ..................................................................................................................... 345
Delete Form............................................................................................................................. 347
Other Settings ......................................................................................................................... 347
1
On the [Tools] screen, select [Print Service Settings].
For the method of displaying the [Tools] screen, refer to "System Settings Procedure" (P.280).
2
Select an item to set or change.
Allocate Memory
For each interface, set the memory capacity of the receiving buffer (temporary storage for
data sent from the client).
You can change the receiving buffer capacity according to its use and purpose. Increasing the
receiving buffer capacity may allow a client to be released sooner from an interface.
Note • If you change the capacity memory, the memory is reset, thus all data stored in memory area is
erased.
• You cannot allocate more memory beyond its memory capacity. When you turn the machine on, and
the size set exceeds the total memory size, the system automatically adjusts the memory size.
• When a port is set to [Disabled], the corresponding items to the port do not appear.
• Depending on the amount of data sent from the client, increasing the memory capacity may not
change the time taken to release the client.
PostScript Memory
Specify a value for the PostScript memory capacity from 70.00 to 128.00 MB in 0.25 MB
increments.
Note • The maximum amount of memory you can allocate varies according to the amount of free space
available in memory.
ART IV, ESC/P, 201H Form Memory
Displays where to save forms for use with ESC/P-K.
HP-GL/2 Auto Layout Memory
The working memory area for the HP-GL/2 auto layout feature is fixed to the hard disk.
Job Ticket Memory
Specify the amount of memory to use for job tickets from 0.25 to 8.00 MB in 0.25 MB
increments.
Note • The maximum amount of memory you can allocate varies according to the amount of free space
available in memory.