Dell C5765DN MFP Color Laser Printer - Manual (Page 228)

13 Maintenance
228
6
Push the staple cartridge into the finisher until
it clicks into place.
7
Close the finisher front cover.
Note • If the front cover is not closed completely, a message appears and the machine will remain paused.
Replacing Fusing Unit
When the fusing unit is near or reaches the end of its life, the following messages are
displayed on the touch screen. Follow the messages.
Note • To prevent electric shock, always turn off the machine and disconnect the power cable from the
grounded outlet before performing maintenance.
• To avoid burns, do not replace the fusing unit immediately after printing. The fusing unit becomes
extremely hot during use.
1
Make sure that the <Data> indicator light is off and there are no jobs currently in process.
2
Press the power switch to the [ ] position to
switch the power off and wait for 30 minutes
before removing the fusing unit.
Message Remaining Page Yield Solution
Consumables need to
be ordered. Press
Machine Status button
and select the Supplies
tab for details.
Approx. 20,000 pages Order the fusing unit.
Consumables need to
be replaced. Press
Machine Status button
and select the Supplies
tab for details.
- Replace the fusing unit
with a new one.