Pseudo-photo gradation mode" (p.364), Folder selector setup" (p.364), Memory full procedure" (p.364) – Dell C5765DN MFP Color Laser Printer User Manual
Page 364: Mixed size originals scan mode" (p.364), Fax data in folder priority 1 to 3" (p.364), Direct fax" (p.364)
15 Tools
364
Pseudo-Photo Gradation Mode
You can select a gradation expression mode. Selecting this mode enables the machine to
change the processing method for gray part (halftone) to achieve near-photo quality. Select
either [Error Diffusion] or [Dither].
Changing this setting also changes the photo gradation mode for Color Scanning (Black &
White).
Folder Selector Setup
Select whether or not to use the Folder Selector Setup feature.
The Folder Selector Setup feature allows you to classify received faxes by line type and store
them in folders specified.
Memory Full Procedure
If there is insufficient hard disk memory while scanning a document, a screen appears asking
you how you want to handle the partially stored data.
Set the process you want the machine to perform for the partially stored data after a certain
time has elapsed in the confirmation screen.
You can set the time until the memory full procedure is carried out. For more information, refer to
Delete Job
Deletes the data partially stored.
Run Job
Treats the read-in data as valid, and start scanning the document partially stored.
Maximum Stored Pages
Set the maximum number of pages stored for a fax document. You can specify from 1 to 999
pages.
Mixed Size Originals Scan Mode
Set the scan mode when the machine scans documents of various sizes simultaneously with
the document feeder. If only documents of standard sizes are to be scanned, we recommend
that you select [Standard Size Mode].
Note
• When [Standard Size Mode] is selected, image loss may occur if the following types of documents are
scanned:
- Non-standard size documents
- B4 size documents with the inch series setting in [Paper Size Settings].
Fax Data in Folder Priority 1 to 3
Set the priority to display the fax information received using folders. For instance, when
using Dell Network Scanner Utility 3, the fax information is displayed in the [Recipient]
section of the file list screen.
There are priority levels from 1 to 3. All priority can be set, however, if you want to display
only one priority level, make the settings of all priority levels the same.
Direct Fax
Set whether or not to receive a fax, which is instructed using a fax driver from a computer.
When you select [Disabled], the Direct Fax feature becomes unavailable.