Dell C5765DN MFP Color Laser Printer User Manual

Page 517

Advertising
background image

Machine Trouble

517

Documents are

often jammed.

Are suitable types of

documents being used?

Correctly load documents suitable for the

document feeder.
Refer to "Copying Procedure" (P.50).

Are you trying to use irregular

shaped documents, business

cards, transparencies, or thin

documents?
Are you trying to use

documents with sticky tags,

paper clips or adhesive tape?

Remove sticky tags, paper clips or adhesive

tape from the document before copying.

Are the document guides set

in the correct positions?

Adjust the document guide positions.
Refer to "Copying Procedure" (P.50).

Is a piece of torn paper

remaining in the document

feeder?

Open the document feeder cover and check

inside.
Refer to "Document Jams" (P.626).

Is the [Mixed Size Originals]

setting set to [Off] when you

copy originals of different

sizes?

Set [Mixed Size Originals] to [On].
Refer to "Mixed Size Originals (Scanning

Different Size Documents Simultaneously)"

(P.89).

Is an A5 document loaded in
landscape orientation ( ) on

the document feeder when

[Mixed Size Originals] is set

to [On]?

Load the A5 document in portrait orientation
( ).

An edge of the

document is

folded.

Is the document curled?

Flatten the curl and load the document again.

Cannot copy in

color.

Is [Output Color] set to

[Black & White]?

Set [Output Color] to [Color].
Refer to "Output Color (Selecting the Color

for Copying)" (P.70).

Is a message displayed on the

touch screen prompting you

to replace the toner cartridge?

Replace the toner cartridge of the color

indicated in the message.
Refer to "Replacing Toner Cartridges"

(P.219).

Is a message displayed on the

touch screen prompting you

to replace the drum cartridge?

Replace the drum cartridge indicated in the

message.
Refer to "Replacing Drum Cartridges C, M,

Y, or K" (P.223).

Cannot staple

properly

Is staple jam occurred in the

staple cartridge?

Remove the staple jammed in the cartridge.
Refer to "Stapler Faults" (P.628).

Is the print driver set

correctly?

Check the [Staple] setting in [Print Setup] in

the print driver when you send a print job

from the computer.

Symptom

Cause

Remedy

Advertising