Dell POWEREDGE M1000E - Manual (Page 220)

188 Fabric OS Command Reference
53-1001764-02
cryptoCfg
2
SP state: Online
To display the encryption group member information:
SecurityAdmin:switch>
cryptocfg --show -groupmember -all
NODE LIST
Total Number of defined nodes:2
Group Leader Node Name: 10:00:00:05:1e:41:9a:7e
Encryption Group state: CLUSTER_STATE_CONVERGED
Node Name: 10:00:00:05:1e:41:9a:7e (current node)
State: DEF_NODE_STATE_DISCOVERED
Role: GroupLeader
IP Address: 10.32.244.71
Certificate: GL_cpcert.pem
Current Master Key State: Not configured
Current Master KeyID: 00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00
Alternate Master Key State:Not configured
Alternate Master KeyID: 00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00
EE Slot: 0
SP state: Operational; Need Valid KEK
Current Master KeyID: 00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00
Alternate Master KeyID: 00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00
No HA cluster membership
Node Name: 10:00:00:05:1e:39:14:00
State: DEF_NODE_STATE_DISCOVERED
Role: MemberNode
IP Address: 10.32.244.60
Certificate: enc1_cpcert.pem
Current Master Key State: Not configured
Current Master KeyID: 00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00
Alternate Master Key State:Not configured
Alternate Master KeyID: 00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00
EE Slot: 0
SP state: Unknown State
Current Master KeyID: 00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00
Alternate Master KeyID: 00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00
No HA cluster membership
No HA cluster membership
C. Group-wide policy configuration
To set the failback mode to manual failback:
SecurityAdmin:switch>
cryptocfg --set -failbackmode manual
Set failback policy status: Operation Succeeded.
To set the heartbeat miss value to 3:
SecurityAdmin:switch>
cryptocfg --set -hbmisses 3
Set heartbeat miss status: Operation Succeeded.
To set the heartbeat timeout value to 10 seconds:
SecurityAdmin:switch>
cryptocfg --set -hbtimeout 10
Set heartbeat timeout status: Operation Succeeded.
D. High Availability (HA) cluster configuration
NOTE: HA cluster configuration commands must be committed before they take effect.