Licenseidshow – Dell POWEREDGE M1000E User Manual
Page 512
480
Fabric OS Command Reference
53-1001764-02
licenseIdShow
2
licenseIdShow
Displays the system license ID.
Synopsis
licenseidshow
Description
Use this command to display the license ID of the system.
Some features of the switch and the fabric are optional, licensed products. Without a license
installed for such products, the services provided by these features are not available.
This command displays the system license ID used for generating and validating licenses on the
system. The license ID format consists of eight pairs of hexadecimal values, separated by colons.
Each hexadecimal value is between 00 (0) and FF (255).
Notes
While the format of this identifier might be similar or even identical to other identifiers in the
system, no inferences should be made about the relationships between them as they are subject to
change independently of one another.
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS Commands" and Appendix A, "Command
Availability" for details.
Operands
none
Examples
To display the license ID:
switch:admin>
licenseidshow
a4:f8:69:33:22:00:ea:18
See Also
licenseAdd, licenseHelp, licensePort, licenseRemove, licenseShow, licenseSlotCfg