Dell POWEREDGE M1000E - Manual (Page 894)

862 Fabric OS Command Reference
53-1001764-02
secStatsShow
2
secStatsShow
Displays one or all security statistics.
Synopsis secstatsshow [name[, “domain[;domain]”]]
Description Use this command to display one or all security statistics. This command can be issued on any
switch to display local security statistics. If an FCS policy is enabled and secStatsShow is issued on
the primary FCS switch, this command can retrieve and display the security statistics for any or all
switches in the fabric.
Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS Commands" and Appendix A, "Command
Availability" for details.
Operands When invoked without operands, this command displays the security statistics on the local switch
or chassis. The following operands are optional:
name Specify the name of the security statistic you want to view. The specified
policy name must be capitalized. If executed on the primary FCS, specify an
asterisk (*) to represent all security policies in the fabric. Valid values for this
operand are:
TELNET_POLICY
HTTP_POLICY
API_POLICY
RSNMP_POLICY
WSNMP_POLICY
SES_POLICY
MS_POLICY
SERIAL_POLICY
FRONTPANEL_POLICY
SCC_POLICY
DCC_POLICY
LOGIN
INVALID_TS
INVALID_SIGN
INVALID_CERT
AUTH FAIL
SLAP_BAD_PKT
TS_OUT_SYNC
NO_FCS
INCOMP_DB