Portlogtypeenable – Dell POWEREDGE M1000E User Manual
Page 761
Fabric OS Command Reference
729
53-1001764-02
portLogTypeEnable
2
portLogTypeEnable
Enables the port log of a specified port log type.
Synopsis
portlogtypeenable id
Description
Use this command to enable the port log for a specified port log type.
Note
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command
Availability" for details.
Operands
This command has the following operand:
id
Specifies a nonzero value that corresponds to the port log type to be enabled.
Use portLogEventShow for a listing of values corresponding to supported log
types.
Examples
To enable logging of type 2 port log events:
switch:admin>
portlogtypeenable 2
See Also
portLogEventShow, portLogTypeDisable