Fcplogshow – Dell POWEREDGE M1000E User Manual
Page 305
Fabric OS Command Reference
273
53-1001764-02
fcpLogShow
2
fcpLogShow
Displays the FCPD debug information log (debug command).
Synopsis
fcplogshow
Description
Use this command to display the debug information logged at various stages during the Fibre
Channel Protocol daemon (FCPD) device probing.
Note
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command
Availability" for details.
Operands
none
Examples
To display the FCPD debug information log:
switch:admin>
fcplogshow
Time Stamp Event Port file&lineno arg0 arg1 arg2 arg3 arg4
===============================================================================
08:20:12.274 FlshOrProbe 0 1 536 2 :0 :0 :0 :0
08:20:12.275 ProbeFlsh 0 1 3031 0 :0 :0 :0 :0
08:20:12.275 FlshOrProbe 1 1 536 2 :0 :0 :0 :0
08:20:12.275 ProbeFlsh 1 1 3031 0 :0 :0 :0 :0
08:20:12.275 FlshOrProbe 2 1 536 2 :0 :0 :0 :0
08:20:12.275 ProbeFlsh 2 1 3031 0 :0 :0 :0 :0
08:20:12.275 FlshOrProbe 3 1 536 2 :0 :0 :0 :0
08:20:12.275 ProbeFlsh 3 1 3031 0 :0 :0 :0 :0
08:20:12.275 FlshOrProbe 4 1 536 2 :0 :0 :0 :0
[output truncated]
See Also
fcpLogClear, fcpLogDisable, fcpLogEnable