Dell POWEREDGE M1000E - Manual (Page 896)

864 Fabric OS Command Reference
53-1001764-02
sensorShow
2
sensorShow
Displays sensor readings.
Synopsis sensorshow
Description Use this command to display the current temperature, fan, and power supply status and readings
from sensors located on the switch. The actual location of the sensors varies, depending on the
switch type.
Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS Commands" and Appendix A, "Command
Availability" for details.
Operands none
Examples To view all sensor values:
switch:admin>
sensorshow
sensor 1: (Temperature) is Ok, value is 39 C
sensor 2: (Temperature) is Absent
sensor 3: (Temperature) is Absent
sensor 4: (Temperature) is Absent
sensor 5: (Temperature) is Ok, value is 26 C
sensor 6: (Temperature) is Ok, value is 27 C
sensor 7: (Fan ) is Ok, speed is 2537 RPM
sensor 8: (Fan ) is Ok, speed is 2537 RPM
sensor 9: (Fan ) is Ok, speed is 2556 RPM
sensor 10: (Power Supply ) is Ok
sensor 11: (Power Supply ) is Absent
sensor 12: (Power Supply ) is Ok
sensor 13: (Power Supply ) is Absent
See Also fanShow, tempShow