Slotpoweroff – Dell POWEREDGE M1000E User Manual
Page 907
Fabric OS Command Reference
875
53-1001764-02
slotPowerOff
2
slotPowerOff
Removes power from a slot.
Synopsis
slotpoweroff slot
Description
Use this command to turn off the power to a blade unit. The slot must have a valid blade unit
present and the blade unit must be of a type that can be powered off.
Note
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command
Availability" for details.
Operands
This command has the following operand:
slot
Specify the slot number of the blade to be powered down. This operand is
required.
Examples
To power off blade unit 3:
switch:admin>
slotpoweroff 3
Slot 3 is being powered off
See Also
powerOffListSet, powerOffListShow, slotPowerOn, slotShow