Diagdisablepost – Dell POWEREDGE M1000E User Manual
Page 236
Advertising
204
Fabric OS Command Reference
53-1001764-02
diagDisablePost
2
diagDisablePost
Disables the power-on self-test (POST).
Synopsis
diagdisablepost
Description
Use this command to disable POST. A reboot is not required for this command to take effect. Use
the diagPost command to display the current POST status, and use diagEnablePost to enable POST.
Note
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command
Availability" for details.
Operands
none
Examples
To disable the POST:
switch:admin>
diagdisablepost
Config update Succeeded
Diagnostic POST is now disabled.
See Also
diagEnablePost, diagPost
Advertising