Syslogdipshow – Dell POWEREDGE M1000E User Manual
Page 981
Fabric OS Command Reference
949
53-1001764-02
syslogdIpShow
2
syslogdIpShow
Displays all syslog daemon IP addresses.
Synopsis
syslogdipshow
Description
Displays the list of servers that are running the syslogd daemon and to which system messages are
sent. Servers are specified in the configuration database by IP address. IPv4 and IPv6 addresses
are supported.
Note
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS Commands" and Appendix A, "Command
Availability" for details.
Operands
none
Examples
To display all syslog daemon IP addresses configured on a switch:
switch:admin>
syslogdipshow
syslog.1 1080::8:800:200C:417A
See Also
errShow, syslogdFacility, syslogdIpAdd, syslogdIpRemove