Dell POWEREDGE M1000E - Manual (Page 986)

954 Fabric OS Command Reference
53-1001764-02
sysMonitor
2
To display the Fabric Watch configuration for temperature:
switch:admin>
sysmonitor --show env -area temp
Class: ENV
Area : TEMP
ThLevel : Def
ActLevel: Def
High :
Custom:
TimeBase: None
Value : 65
Trigger : Above Action: Raslog,SNMP
Trigger : Below Action: Raslog,SNMP
Default:
TimeBase: None
Value : 65
Trigger : Above Action: Raslog,SNMP
Trigger : Below Action: Raslog,SNMP
Low:
Custom:
TimeBase: None
Value : 0
Trigger : Above Action: None
Trigger : Below Action: Raslog,SNMP
Default:
TimeBase: None
Value : 0
Trigger : Above Action: None
Trigger : Below Action: Raslog,SNMP
Buffer:
Custom:
Value : 10
Default:
Value : 10
To display current temperature values:
switch:admin>
sysmonitor --show env -area temp -c
Class |Area |PortNo|C# |Value |State
---------|-------|------|----|---------|-------
ENV |TEMP |000001|n/a |39 |InRange
ENV |TEMP |000002|n/a |35 |InRange
ENV |TEMP |000003|n/a |42 |InRange
ENV |TEMP |000004|n/a |44 |InRange
To configure Fabric Watch custom thresholds for flash memory:
switch:admin>
sysmonitor --config env -area resource -highthreshold -value 100
To apply the custom thresholds for flash memory:
switch:admin>
sysmonitor --apply env -area temp -thresh_level cust
To display the Fabric Watch configuration for flash memory:
switch:admin>
sysmonitor --show resource
Class: RESOURCE
Area : FLASH
ThLevel : Cust
ActLevel: Cust
High :