Ioddelayreset – Dell POWEREDGE M1000E User Manual
Page 447
Fabric OS Command Reference
415
53-1001764-02
iodDelayReset
2
iodDelayReset
Resets the user-defined IOD delay settings to default values.
Synopsis
ioddelayreset domain_id
Description
Use this command to reset the user-defined IOD delay settings to default values (-1). This
command resets IOD delay values for a specified domain ID that was previously configured with the
iodDelaySet command.
The switch must be disabled before IOD delay can be reset.
Notes
The iodDelaySet command is deprecated in Fabric OS v6.2.0. The iodDelayReset command is
retained for legacy reasons only. If you have configured IOD delay settings previously, you must
reset the IOD settings to defaults before upgrading to v6.2.0. Use iodDelayShow to determine
current settings.
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Understanding Admin Domain Restrictions" and Appendix A,
"Command Availability" for details.
Operands
none
Examples
To reset IOD delay to default values for domain 10:
switch:admin>
ioddelayreset 10
See Also
iodDelayShow