Dell POWEREDGE M1000E User Manual
Page 730
698
Fabric OS Command Reference
53-1001764-02
portCmd
2
To configure a TPerf source to generate one-way low priority traffic with a random PDU size from 0
to 400 bytes and a payload pattern of ones.
switch:admin>
portcmd --tperf 16 -source -low -size 400 -random -unidirectional -pattern 2
TPerf has been configured successfully for 16
TPerf is generating traffic on 16 priority: low
**********************************************************************
Tunnel ID: 16
High Priority Medium Priority Low Priority
bytes tx 0 0 19800708
bytes rx 0 0 0
PDUs tx 0 0 1434686
PDUs rx 0 0 0
bad CRC headers rx 0 0 0
bad CRC payloads rx 0 0 0
out of seq PDUs rx 0 0 0
flow control count 0 0 0
last rtt N/A N/A N/A
**********************************************************************
See Also
portCfg, portShow