Fciphelp – Dell POWEREDGE M1000E User Manual
Page 282
250
Fabric OS Command Reference
53-1001764-02
fcipHelp
2
fcipHelp
Displays FCIP command information.
Synopsis
fciphelp
Description
Use this command to display a listing of Fibre Channel over IP (FCIP) commands with short
descriptions for each command. FCIP commands require an FCIP license.
Note
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command
Availability" for details.
Operands
none
Examples
To display FCIP command help information:
switch:admin>
fciphelp
fastwritecfg
Configure FC fastwrite feature
portcfg
Create/Delete a new ip interface/route/arp entry or
fcip tunnel on the GigE port
portcmd
Execute commands (ping etc) on the GigE port
portshow
Show configured ip interfaces/routes/arp entries or
fcip tunnels on the GigE Port
See Also
fastWriteCfg, portCfg, portCmd, portShow