Dell POWEREDGE M1000E - Manual (Page 909)

Fabric OS Command Reference 877
53-1001764-02
slotShow
2
slotShow
Displays the status of all slots in the system.
Synopsis slotshow [-m] [-p]
Description Use this command to display the current status of each slot in the system. Depending on the option
used, the command retrieves information on blade type, blade ID, status, Brocade model name,
and power usage for each slot in the switch or chassis.
When no operand is specified, slotShow displays the blade type, blade ID, and status for each slot.
In this view, the fields and their possible values are as follows:
Slot Displays the physical slot number.
Blade Type Displays the blade type as one of the following:.
SW BLADE The blade is a switch.
CP BLADE The blade is a control processor.
CORE BLADE The blade is a core switch blade.
AP BLADE The blade is an application processor.
UNKNOWN The blade not present or its type is not recognized.
ID Displays the blade type ID as one of the following:
16 CP256 control processor blade
17 FC4-16 port blade
18 FC4-32 port blade
24 FR4-18i port blade
31 FC4-16IP port blade
33 FA4 -18 port blade
36 FC4-48 port blade
39 FC10-6 port blade
43 FS8-18 encryption blade
46 CR4S-8 core blade
50 CP8 control processor blade
52 Core8 switch blade
37 FC8-16 port blade
55 FC8-32 port blade
51 FC8-48 port blade
55 FC8-32 port blade
74 FCoE10-24 port blade
75 FX8-24 port blade
77 FC8-64 port blade