Dell POWEREDGE M1000E - Manual (Page 799)

Fabric OS Command Reference 767
53-1001764-02
portShow
2
Connected Count: 0
Duration: 1 day, 2 hours, 47 minutes, 28 seconds
468 Output Bytes
0 Bps 30s Avg, 0 Bps Lifetime Avg
4 Output Packets
0 pkt/s 30s Avg, 0 pkt/s Lifetime Avg
212 Input Bytes
0 Bps 30s Avg, 0 Bps Lifetime Avg
1 Input Packets
0 pkt/s 30s Avg, 0 pkt/s Lifetime Avg
TCP Stats:
387601068268 Output Bytes
1666896581 Output Packets
188878848584 Input Bytes
1468285669 Input Packets
Retransmits: 0
Round Trip Time: 0 ms
Out Of Order: 0
Slow Starts: 0
Performance Statistics - Priority: Low
Oper Status: Up
Flow Ctrl State: Off
Connected Count: 0
Duration: 1 day, 2 hours, 47 minutes, 28 seconds
0 Output Bytes
0 Bps 30s Avg, 0 Bps Lifetime Avg
0 Output Packets
0 pkt/s 30s Avg, 0 pkt/s Lifetime Avg
0 Input Bytes
0 Bps 30s Avg, 0 Bps Lifetime Avg
0 Input Packets
0 pkt/s 30s Avg, 0 pkt/s Lifetime Avg
TCP Stats:
94107504 Output Bytes
1425817 Output Packets
37074500 Input Bytes
1425814 Input Packets
Retransmits: 0
Round Trip Time: 0 ms
Out Of Order: 0
Slow Starts: 0
To display FCP emulation statistics using the command with two levels and a single command:
switch:admin>
portshow xtun 1/13 -fcp -itl -itn -stats
To display FCP emulation statistics, information, and configuration information using the command
with a single level and three commands:
switch:admin>
portshow xtun 1/13 -fcp -itl -stats -info -cfg
To display FICON statistics on the Brocade 7800:
switch:admin>
portshow xtun 16 -ficon -stats
FICON FCIP Tunnel Statistics:
STATISTICS (decimal
Emulation Common Statistical Counts (decimal)
=============================================
TotalIngressFrames = 12280588298