Dell POWEREDGE M1000E - Manual (Page 343)

Fabric OS Command Reference 311
53-1001764-02
fddCfg
2
To set the Fabric-Wide Consistency Policy as tolerant, omit the "S". A valid
policy set should be of the form "SCC:S;DCC;FCS". To set the fabric-wide policy
to NULL (default) or no fabric-wide consistency, use the policy Set "".
Supported policies are Switch Connection Control (SCC), Device Connection
Control (DCC), and Fabric Configuration Server (FCS). All members specified
in a given policy set are automatically distributed to all participating switches
in the fabric that support the policy. Refer to the DESCRIPTION section for
specific exceptions. In the presence of a fabric-wide FCS consistency policy,
this command can only be run from the primary FCS switch.
Examples To display the Fabric-Wide Consistency Policy and the accept/reject configuration for all databases:
switch:admin>
fddcfg -- showall
Local Switch Configuration for all Databases:-
DATABASE - Accept/Reject
---------------------------------------
SCC - accept
DCC - accept
PWD - accept
FCS - accept
AUTH - accept
IPFILTER - accept
Fabric-Wide Consistency Policy:- “SCC:S;DCC;FCS”
To configure the switch to accept distribution of the SCC policy set and PWD database:
switch:admin>
fddcfg -- localaccept “SCC;PWD”
Local Switch Configured to accept policies.
To configure this switch to reject distribution of SCC and DCC policy sets:
switch:admin>
fddcfg -- localreject “SCC;DCC”
Local Switch Configured to reject policies.
To set the Fabric-Wide Consistency Policy to “strict” for SCC and “tolerant” for DCC and FCS:
switch:admin> fddcfg -- fabwideset “SCC:S;DCC;FCS”
See Also distribute