Secpolicysave – Dell POWEREDGE M1000E User Manual
Page 889
Fabric OS Command Reference
857
53-1001764-02
secPolicySave
2
secPolicySave
Saves a defined security policy to persistent memory.
Synopsis
secpolicysave
Description
Use this command to save a defined security policy to persistent memory. Secpolicysave saves the
modified SCC, DCC, and FCS policies to the Defined Security Policy Set on the local switch.
Notes
This command is always a local switch operation. A fabric-wide consistency configuration does not
affect the behavior of this command.
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command
Availability" for details.
Operands
none
Example
To save a defined policy set to persistent memory:
switch:admin>
secpolicysave
secpolicysave command was completed successfully.
See Also
fddCfg, secPolicyAbort, secPolicyActivate, secPolicyAdd, secPolicyCreate, secPolicyDelete,
secPolicyDump, secPolicyRemove, secStatsShow