Dell POWEREDGE M1000E - Manual (Page 828)

796 Fabric OS Command Reference
53-1001764-02
portSwapDisable
2
portSwapDisable
Disables the PortSwap feature.
Synopsis portswapdisable
Description Use this command to disable the PortSwap feature. The portSwap command cannot be used after
this feature is disabled.
The disabled state of the PortSwap feature is persistent across reboots and power cycles.
Enabling or disabling the PortSwap feature does not affect previously performed PortSwap
operations.
Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command
Availability" for details.
Operands none
Examples To disable the PortSwap feature:
switch:admin>
portswapdisable
See Also portSwap, portDisable, portEnable, portShow, portSwapEnable, portSwapShow, switchShow