Dell POWEREDGE M1000E - Manual (Page 264)

232 Fabric OS Command Reference
53-1001764-02
fabRetryShow
2
fabRetryShow
Displays the retry count of the fabric commands.
Synopsis fabretryshow
Description Use this command to display the retry count of the fabric commands. The SW_ISL (ISL ports)
information displays the retry count for the following fabric commands:
ELP Exchange Link Parameters
EFP Exchange Fabric Parameters
HA_EFP Exchange Fabric Parameters used during warm recovery
DIA Domain Identifier Assigned
RDI Request Domain Identifier
BF Build Fabric
FWD Fabric Controller Forward
EMT Fabric Controller Mark Timestamp
ETP Fabric Controller Trunk Parameters
RAID Return Address Identifier
GAID Get Address Identifier
ELP_TMR Used internally for fabric application (not a SW_ISL)
GRE Get Route Entry
ECP Exchange Credit Parameters
Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command
Availability" for details.
Operands none
Examples To display the retry count of Fabric OS commands:
switch:user>
fabretryshow
SW_ILS
E_Port ELP EFP HA_EFP DIA RDI BF FWD EMT ETP RAID GAID ELP_TMR GRE ECP
16 0 0 0 0 0 0 0 0 0 0 0 0 0 0
17 0 0 0 0 0 0 0 0 0 0 0 0 0 0
See Also fabricLog