Dell POWEREDGE M1000E - Manual (Page 863)

Fabric OS Command Reference 831
53-1001764-02
secCertUtil
2
showcsr Displays the content of the CSR on the switch without page breaks. Use the
pipe operator followed by the “more” option to display the content one page
at a time.
delcsr [-nowarn] Deletes CSR. This command prompts for confirmation before deleting the
CSR unless -nowarn is specified.
generate -fcapall Generates FCAP switch CSR, passphrase, and key.
-keysize 1024 | 2048
Specifies the size of the key. Valid values are 1024 or 2048. bits. The greater
the value, the more secure is the connection; however, performance
degrades with size.
delete Deletes the specified certificate. Specify one of the following operands:
-ldapcacert
Deletes all LDAP CA certificates. You must specify a file name when deleting
the LDAP CA certificates. All LDAP certificates are concatenated in a single
file. Use show -ldapcacert to list that file name on the switch. You cannot
delete an individual certificate.
-fcapcacert
Deletes the FCAP CA certificate.
-fcapswcert
Deletes the FCAP SW certificate.
-fcapall Deletes all FCAP objects including the switch CSR, keys, pass phrase, Root CA
certificate, and switch certificate.
-nowarn Deletes the specified file without confirmation. This operand is optional.
export Exports a CSR to a host. This command is typically used to submit a CSR to
the Certification Authority (CA) that issues the certificate. The following
operands are optional; if omitted, the command prompts interactively for your
input.
-ldapcacert -certname certificate name
Exports an LDAP CA certificate from the switch to a remote host. You must
specifiy the name of the LDAP CA certificate to be exported. Use the show
option for a list of existing certificates.
-fcapswcert Exports the FCAP switch certificate from the switch to the remote host. The
certificate is exported with the same filename it had when it was imported.
-fcapswcsr Exports the FCAP switch CSR certificate from the switch to the remote host.
The FCAP switch CSR is exported as switchIPfcapSw.csr.
-fcapcacert Exports the FCAP CA certificate from the switch to the remote host. The FCAP
CA certificate is exported as switchIPfcapRootCA.pem.
-protocol ftp | scp
Specifies the protocol as either FTP or SCP.
-ipaddr IP address
Specifies the IP address of the remote host.
-remotedir remote directory
Specifies the remote directory. Provide a fully qualified path name.