Tempshow – Dell POWEREDGE M1000E User Manual
Page 990
958
Fabric OS Command Reference
53-1001764-02
tempShow
2
tempShow
Displays temperature readings.
Synopsis
tempshow
Description
Use this command to display the current temperature readings of all temperature sensors in a
switch. For each sensor, this command displays the slot number (if applicable), the sensor state,
and the temperature. The temperature readings are given in both Centigrade and Fahrenheit.
Notes
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS Commands" and Appendix A, "Command
Availability" for details.
Refer to the hardware reference manual for your switch to determine the normal temperature
range.
Operands
none
Examples
To display temperature and status sensors:
switch:user>
tempshow
Index Slot State Centigrade Fahrenheit
=====================================================
1 1 Ok 41 105
2 2 Ok 39 102
3 3 Absent
4 4 Absent
5 5 Ok 26 78
6 6 Ok 27 80
See Also
fanShow, psShow, sensorShow, slotShow