Document Outline

• Safety Precautions
  • General Cautions
  • WARNING
  • CAUTION
  • Notes
  • Precautions on CE Marking
  • Precautions for Wiring
  • Safety Precautions on Laser Products
• Organization of this Manual
• Table of Contents
• Chapter 1 Before Use
  • System Configuration
  • Checking the Package Contents
    • LK-G3001V/LK-G3001PV (Single Unit Type Controller)
    • LK-G3001/LK-G3001P (Separate Type Controller)
    • LK-GD500 (Separate Type Controller)
    • Head (LK-G15/LK-G10)
    • Head (Model other than LK-G15/LK-G10)
    • LK-GC2/GC5/GC10/GC20/GC30
  • Identifying Part Names and Functions
    • Controller
    • Head
  • Installing and Connecting the Heads and Optional Parts
    • Installing the Head
    • Attaching the ND Filter (Option)
    • Installations Depending on the Measurement Target
    • Installing the Controller
    • Connection
  • Outline of Measurement and Settings
    • Switching Modes
    • Setting Mode
  • Returning the LK-Series to the Factory Default Settings
• Chapter 2 Operations and Functions during Measurement
  • Switching the Measurement Value Displays
  • Setting the Tolerance Comparator Value
    • The Function of the Tolerance Settings
    • Hysteresis
  • Setting the Display Value Instantaneously to Zero (Auto-Zero)
  • Program Function
  • Switching Program Nos.
  • Performing Statistical Computation with the Measurement Value
• Chapter 3 Function Settings
  • Measurement, Data Flow and Functions
  • Setting the Head
    • List of Functions and Function Nos.
    • List of Default Values and Setting Ranges
    • List of the Head Setting Screens
    • Setting ABLE
    • Setting the Measurement Mode According to the Measuring Target
    • Specifying the Process When Measurement is Not Possible (Alarm Process)
    • Automatically Teaching the Adjustment Range of ABLE According to the Target
    • Setting the Mounting Mode
  • Setting the Conditions of the Measurement Value Output
    • List of Functions and Function Nos.
    • List of Default Values and Setting Ranges
    • List of the OUT Setting Screens
    • Calculating Between the Heads
    • Setting the Scaling for Measurement (Calibration)
    • Stabilizing the Measurement by Filtering
    • Using the Hold Function (Measurement Mode)
    • Setting the Trigger Condition
    • Measuring with Offset
    • Setting the Unit and the Minimum Display Unit
    • Scaling the Analog Output
    • Outputting the Analog Output Without Holding
  • Setting the Common Function
    • List of Functions and Function Nos.
    • List of Default Values and Setting Ranges
    • List of the Common Function Setting Screens
    • Setting the Sampling Rate of Measurement Value
    • Setting the Mutual Interference Prevention Function
    • Setting the External Timing Input
    • Setting the Output Form of the Tolerance Comparator
    • Setting the Strobe Output Time
    • Accumulating the Measurement Value in the Memory (Data Storage Function)
  • Setting the Operations of the Equipment (Environment Settings)
    • List of Functions and Function Nos.
    • List of Default Values and Setting Ranges
    • List of the Environment Setting Screens
    • Setting the Communication Specifications of the RS-232C
    • Setting the Program Switching Method
    • Copying/Initializing the Program
    • Preventing Erroneous Operation on the Panel (Panel Lock)
    • Reducing the Power Consumption (Eco Mode)
• Chapter 4 Input/Output Terminals
  • Identifying Names and Functions of the Input/Output Terminals
    • Functions of the Input/Output Terminals
    • Functions of the Input and Output Signals
  • Timing Chart
• Chapter 5 RS-232C
  • Specifications
    • Pin Layout
    • Communication Specifications
    • Communication Performance and Communication Mode in the Measurement State
    • Overview of the Settings According to External Devices
  • Outputting Measurement Values and Changing Settings through Commands
    • Connecting the PC or PLC Link Unit
    • Mode Change Command
    • Measurement Control Command Format
    • Change Parameter Command
    • Check Parameter Command Format
    • Timing Chart
  • Outputting Measurement Values in External Synchronization
    • Environment Settings Parameters
    • Output
    • Timing Chart
    • Output Format
    • ASCII Code Table (Reference)
• Chapter 6 Specifications of the LK-G Series
  • Specifications
    • Specifications of the Controller
    • Specifications of the Head
    • Specifications of the Head-to-Controller Cable
    • Status Table
    • Response Delay Time
    • Outside Dimensions
  • Characteristics
    • Spot Dimension
    • Mutual Interference
• Appendices
  • Troubleshooting
  • Error Messages
  • List of Optional Products
  • Index