ADLINK PCI-8154 User Manual
Page 109
Advertising
![background image](/manuals/733469/109/background.png)
MotionCreatorPro
99
1. Pulse Output Mode: Select the output mode of the
pulse signal (OUT/ DIR). The related function call is
_8154_set_pls_outmode().
2. Pulse Input: Sets the configurations of the Pulse input
signal(EA/EB). The related function calls are
_8154_set_pls_iptmode(), _8154_set_feedback_src().
3. INT Factor: Select factors to initiate the event int. The
related function call is _8154_set_int_factor().
4. Buttons:
Z
Next Card: Change operating card.
Z
Next Axis: Change operating axis.
Z
Save Config: Save current configuration to 8154.ini And
8154MC.ini.
5. I/O Status: The status of motion I/O. Light-On means
Active, while Light-Off indicates inactive. The related
function is _8154_get_io_status.
Advertising