ADLINK PCI-8154 - Manual (Page 112)

102 MotionCreatorPro
added. To close it, click the same button again. To clear
data, click on the curve.
7. Operation Mode: Select operation mode.
Z Absolute Mode: “Position1” and “position2” will be used
as absolution target positions for motion. The related
functions are _8154_start_ta_move(),
_8154_start_sa_move().
Z Relative Mode: “Distance” will be used as relative dis-
placement for motion. The related function is
_8154_start_tr_move(), _8154_start_sr_move().
Z Cont. Move: Velocity motion mode. The related function
is _8154_tv_move(), _8154_start_sv_move().
Z Manual Pulser Move: Manual Pulse motion. Clicking
this button will invoke the manual pulse configuration
window.